This is a nice video of a Nissan 260Z with a VG30DETT swapped from a 300ZX which the author says is putting out around 450 horsepower.
We mentioned on here before that EVS Motors was building a 2JZ-GTE powered 1967 Camaro. Well they didn’t quite get their intended horsepower level of 1,000. The video states the engine is running around 28 psi of boost delivering around 800 horsepower. Which you can see in the video below. EVS Motors Presents The Worlds … Read more
After some requests we made a shirt design that used our Crest logo without the name on it. This design just features the pistons and wrench. Check it out here.
Dodge is sending three Challengers to SEMA this year. One of the three is the Challenger SRT10 concept which has a swapped Viper V10 engine. The Viper V10 produces around 600 hp and 560 lb-ft of torque. The brakes and suspension get an upgrade as well. Of course there is no telling if Dodge planning … Read more
This 1990 Chevrolet Astro Van originally came from the factory with a 4.3L V6 engine. The Chevy Astro is a good choice for a LT1 swap since the 4.3L V6 is based off the Chevy V8 engine. Many of the same parts work for for both. This LT1 has an Edelbrock intake, 600 CFM carburetor, … Read more
Originally this Z28 came with a 302 but had a 396 swapped in its place. The current owner decided the Camaro needed some more power and after careful consideration settled on the beastly ZZ 502 crate motor. This engine out of the box puts down 502 horsepower and 567 lb.-ft. of torque. Also upgraded on … Read more